WLAN Antennas 2.4GHz
Omni directional antennas for outdoor use

Antennas without directional capabilities for outdoor use.
Usage: For coverage of yards or external areas, also point-to-multipoint. Usually mounted on a mast on top of a building, but can also be installed on a wall. Some models are suitable for vehicle mount.

Wifi Omni directional antennas GP-2400

Professional vertical antenna, omni directional, for 2.4GHz WLAN range. SWR better than 1:2. Weatherproof model for outdoor use, but also suitable for indoor applications. The antenna system is DC grounded to prevent static discharges. Includes mounting hardware (stainless steel) for mast or wall mount. Mast diameter from 20 to 55 mm supported. White color, connector N jack (female).

Note: Due to the recessed N jack a usual lightning arrestor can not be used directly below the antenna. We can suggest three possble solutions:
- use a cable extension;
- don't install the arrestor below the antenna, but down at the building;
- buy the short nut 18591, which replaces the supplied long nut.

  GP-2400-6 GP-2400-8 GP-2400-12
Frequency Range 2400-2500 2400-2500 2400-2500 MHz
Gain 6 8 12 dBi
SWR <1:2 <1:2 <1:2
Max. power load 20 20 20 Watt
DC grounded Yes Yes Yes  
Connector N jack (female) N jack (female) N jack (female)  
Max. mast diameter 50 50 50 mm
Length 400 640 960 mm
Weight 0,5 0,6 0,8 Kg
Temperature range -30 - +60 -30 - +60 -30 - +60 °C
18590.6 78.20 € Buy now 18590.8 102.40 € Buy now 18590.12 119.00 € Buy now

Single item 18590

Special model as 18590.12, but 10 dB gain and length of 975mm. N-terminal without support tube, thus also suitable for thick plug, see Fig. With U-bolts, nuts, etc.
Order No.
ZG18590.10 18590 single item 99.00 € Buy now
Info freight charges

Supplied mounting hardware for GP-2400-x

Montagematrial GP-2400

With the supplied mounting hardware the GP-2400 antenna can be installed directly to a wall, e.g. in indoor areas. The 6 dBi version is ideally suited for indoor coverage of building, when mounted in staircase. Suitable cable is 40330.3 (Rev.SMA to N, other lengths available).

Suitable cables for GP-2400 antennas

Antenna cable Reverse-SMA plug to N plug, H-155
Cable suitable for all devices (Router, AP, PCI cards etc.) with Reverse-SMA connector.

Order No.
40330.50CM 50cm 20.10 € Buy now New
40330.1 100cm 23.30 € Buy now
40330.2 200cm 24.40 € Buy now
40330.3 300cm 25.50 € Buy now
40330.4 400cm 26.60 € Buy now
40330.5 500cm 27.60 € Buy now
40330.6 600cm 28.60 € Buy now
40330.6RA 600cm, N-Angle-Plug 29.50 € Buy now
40330.8 800cm 30.80 € Buy now
40330.12 1200cm 35.10 € Buy now
Info freight charges

Antenna cable Reverse-TNC plug to N plug, H-155
Cable suitable for all devices (Router, AP, PCI cards etc.) with Reverse-TNC connector.

Order No.
40334.1 100cm 21.20 € Buy now
40334.2 200cm 22.20 € Buy now
40334.3 300cm 23.20 € Buy now
40334.4 400cm 24.30 € Buy now
40334.5 500cm 22.10 € Buy now
40334.6 600cm 23.00 € Buy now
40334.8 800cm 24.80 € Buy now
Info freight charges
Order No.
40337.3 300cm N-Angle plug 28.80 € Buy now
Info freight charges
Other length on request.

Accessories for GP-2400


Short nut GP-2400.
By replacing the original mounting nut through this short version now also thick plugs are screwed directly to the antenna.
The direct connection of routers and access points such as Ubiquiti is possible.
The existing mounting nut is simply replaced by this short version.


with short nut
Order No.
18591 short nut for GP-2400 4.60 € Buy now
Info freight charges

Wifi antenna GP-2400B omni directional

Professional vertical antenna, omni directional, for 2.4GHz WLAN range. SWR better than 1:2. Weatherproof model for outdoor use, but also suitable for indoor applications. Includes mounting hardware (stainless steel) for mast or wall mount. Mast diameter from 20 to 55 mm supported. White color, connector N jack (female).
In contrast to the GP-2400 models above these antennas have a slightly slimmer tube and a different mast/wall moubnt. Due to the slim mounting tube Ecoflex-15 cable with N-connectors coannot be used with these antennas, all other cables are ok.


  GP-2400-9B GP-2400-12B
Frequency Range 2400-2500 2400-2500 MHz
Gain 9 12 dBi
SWR <1:2 <1:2
Max. Power 20 20 Watt
Connector N socket N socket  
Max. Mast diameter 50 50 mm
Length 660 1060 mm
Weight 0,8 1,2 Kg
Temperature range -30 - +60 -30 - +60 °C
18592.09 105.00 € Buy now 18592.12 140.30 € Buy now
Download: Datasheet GP-2400B WiFi antennas (PDF, DE/EN, 340KB)

Watertight Antennas with protection class IP68


Series of robust, dust and waterproof antennas for industrial applications, protection class IP68. Antennas are available for 420, 8681800/1900 and 2400MHz. The coaxial connector (SMB type) is housed in a protected screw cap.

The antennas are used for typical industrial applications like Zigbee, Bluetooth, Wifi GSM or ISM remote control. The installation at the enclosure is done with a single hole mount with 150cm RG-174 cable attached, open ended. WiMo offers various connectors for the cable type, installation on request.

The antennas have an approximative gain of 2 dBi, omnidirectional radiation, impedance 50Ωm length 92mm.

Order No.
14210.440 Buccaneer Antenna 440-470 MHz, IP68 12.00 € Buy now
14210.868 Buccaneer Antenna 868/1800/1900 MHz, IP68 14.50 € Buy now
14210.SO Buccaneer Single Hole Mount IP68, 150cm Cable RG-174, open 15.80 € Buy now
42901.316 SMA connector, crimp, RG-174 4.70 € Buy now
42901.316REV RP-SMA connector, crimp, RG-174 4.45 € Buy now
42075.316 BNC connector, crimp, RG-174 1.70 € Buy now
42402.316 TNC connector, crimp, RG-174 2.60 € Buy now
42955 MCX connector, angled, crimp, RG-174 6.20 € Buy now
42960 MMCX connector, angled, crimp, RG-174 6.20 € Buy now
42750 SMB connector, straight, crimp, RG-174/RG-316 5.50 € Buy now
42755 SMB-connector, angled, crimp, RG-174/RG-316 3.50 € Buy now
99ANSCHLAGEN Service, Installation of one connector 5.00 € Buy now
Info freight charges

Wifi Antenna GP 18005.03 Omni

S-Band GP

Small and unobtrusive omni directional antenna, to be mounted on top of a mast or tube. Ideally suited for remote measuring devices with WiFi connection, garden, yard etc. Weatherproof, with N jack (female).

Frequency Range 2300-2500 MHz
Gain 3 dBi
SWR 1.5
Max. power load 50 Watt
Connector N jack (female)  
Max. mast diameter 25 mm
Length 85 mm
Weight 0,3 Kg
Order No.
18005.03 Wifi Omnidirectional Antenna 3 dBi 36.20 € Buy now
Info freight charges

Splash proof 2.4GHz Antennas, IP54


Splash proof 2.4GHz Antennas, IP54

Model 17014.IPEX with 6 mm thread bolt and 13cm log cable with IPEX (U.FL®) connector. The seal between antenna and housing must be provided by the customer. Length 114mm, gain 1 dBi. Comes complete with nut and lock washer.

Model 17014.RSMA with Reverse SMA connector. Seal between RP-SMA connector an antenna body is achieved with a special gasket integrated into the antenna. The seal between RPSMA connector and RPSMA socket must be provided by the customer. Length 150mm, gain 3 dBi.

Order No.
17014.IPEX 13.80 € Buy now
17014.RSMA 15.00 € Buy now
Info freight charges
Download: Datasheet 17014.IPEX (PDF, DE/EN, 42KB)
Download: Datasheet 17014.RSMA (PDF, DE/EN, 420KB)

Suitable for antenna 17014.RSMA: IPEX (U.FL) Adaptor cable with RP-SMA jack flange mount with gasket, length 10cm.

40350.SFR-X 16.30 € Buy now

New Mini Antennas IP65 for 2.4 GHz and Dual band 2.4 + 5 GHz

Mini Antennas WLAN/ISM

Miniature equipment and machine antennas, well suitable for machine to machine (M2M) communication on 2.4 and/or 5GHz wifi and ISM bands. Very robust construction, weatherproof, protection category IP65 (dust tight, water jets). The antenna have a very simple to use one-hole mount, the 30cm long cable is fed to the interior though this hole. The mounting surface can be of any material (metal, plastic wood). The protruding height of the antenna ranges from 13 to 22mm, depending on model, the diameter is 22mm. The antenna has 30cm teflon cable attached, the connector is Reverse-SMA.

Order No.
18609.0 Mini Antenna 2.4GHz, IP65, 0 dBi, 30cm cable, RP-SMA 15.00 € Buy now
18609.2 Mini Antenna 2.4GHz, IP65, 2 dBi, 30cm cable, RP-SMA 16.30 € Buy now
18609.2.DUAL Mini Antenna 2.4/5GHz, IP65, 2 dBi, 30cm cable, RP-SMA 16.70 € Buy now
18609.X01 Plastic nut, spare part, black 1.15 € Buy now
Info freight charges

Magnet base antenna

Gain 5 dBi, stacked, black radiator. Includes 150cm high quality cable (CLF-100) with various connectors. Solid, ideal for travels with the notebook, weatherproof, can be mounted on top of car (wardriving).

Order No.
20109.RPSMA with RP-SMA connector 21.90 € Buy now
20109.SMA with SMA connector 21.90 € Buy now
Info freight charges
Download: Datasheet Antenna 20109 (PDF, DE/EN, 290KB)

Omni directional antennas with N connector

Use indoors or outdoors, either mount to wall with optional bracket (see below), or mount on top of equipment rack. For vehicle use (antennas are weatherproof) suitable N base mounts are available. MG-200S by Diamond with spring at the base, very solid, the VC-2400-xxx series are without spring.

VC-2400 VC-2400-7 VC-2400-9 MG-200
  VC-2400 VC-2400-7 VC-2400-9 MG-200S
Gain 4,5 dBi 7 dBi 9 dBi 7 dBi
Weight 110 g 180 g 250 g 300 g
Length 26 cm 45 cm 61 cm 60 cm
Color Black White White Black
Article No. 18610 18617.07 18617.09 13018
Price 74.80 € 81.40 € 105.00 € 59.00 €
Order No.
18610 VC-2400 Omni 2.4GHz, 4.5 dBi 74.80 € Buy now
18617.07 VC-2400-7 Omni 2.4GHz, 7 dBi 81.40 € Buy now
18617.09 VC-2400-9 Omni 2.4GHz, 9 dBi 105.00 € Buy now
13018 Diamond MG-200S Omni 2.4GHz 59.00 € Buy now
Info freight charges

Download: VC-2400 (18610) Datasheet (PDF, En, 100KB)
Download: VC-2400 (18617-xx) Datasheet (PDF, En, 100KB)

VC-2455: Dualband (2.4/5GHz) Omni Antenna with N male connector


Robust dualband omni directional antenna with N male connector, for Wifi on 2.4GHz (802.11b/g) and 5GHz (802.11a). Gain 5 dBi (2.4GHz) and 6-8 dBi (5GHz). Very well suited for use on forklist truck, outdoor vehicles and other mobile devices, indoors and outdoors. Solid construction, with the large N connector (male) suitable for rugged installation, for example on magnet base (WiMo Order No. 20125), or on N base chassis mont (WiMo Order No. 20022 or 20024), or on N passthrough (WiMo Order No. 42055). Height 220mm, Diameter 23mm, weight c. 86g.

Frequency Range 2400 - 2500 4900 - 5900 MHz
SWR < 2:1
Impedance 50 Ω
Gain 5 6-8 dBi
Polarisation Vertical
Max. Power 5 W
Connector N male
Dimension 220 x Ø23 mm
Weight 86 ± 10 g
Order No.
18610.DUO VC-2455 Dualband (2.4/5GHz) Omni in White 97.80 € Buy now
Info freight charges
Download: Datenblatt 18610.DUO (PDF, DE/EN, 50KB)

Magnet base for VC-2400 antennas


Black scratch-proof base, approx. 75 mm diameter, with 2m Low-Loss coaxial cable, with N female and RP-SMA or N connector. The base has an integrated magnet which eases the installation for example on an equipment rack, but which is not suitable for mobile use on a car.

Order No.
20125 2m cable, RP-SMA connector 21.90 € Buy now
20125.N 2m cable, N connector 19.00 € Buy now
Info freight charges

Mounting bracket

For wall mount of antennas like MG-200, VC-2400 (18615.N) or all other antennas with SMA or TNC connector (18615.SMA, 18615.TNC).
Versatile use: the 16 mm hole takes any N connector, cable sets or pigtails with N panel jacks, the antenna is then mounted on top of this N jack. Use cable harness Order No. 20052, Pigtail with N jack Order No. 40300.N-F, or N panel mount Order No. 42055. Material aluminum, includes screws etc.
Universal bracket for smaller antennas with SMA (or Reverse-SMA) connector. Install any suitable SMA jack (panel mount), various pigtails etc. into the bracket, the antenna is the mounted on top of the jack. Material aluminum, includes all screws etc.
As above, but with 13 mm hole for TNC or RP-TNC flange mount jacks.

Large mounting bracket (shown with N pigtail, not included)

Small mounting bracket (shown with SMA pigtail, not included)
Order No.
18615.N Mounting bracket, large 7.85 € Buy now
18615.SMA Mounting bracket, small for SMA/RP-SMA 7.85 € Buy now
18615.TNC Mounting bracket, small for TNC/RP-TNC 7.70 € Buy now
Info freight charges

HCT-2400 Rugged M2M Antenna

18608 Nylon M2M Antenna Wifi 2400MHz HCT-2400

Very robust Wifi antenna in Nylon casing!
The HCT-2400 is a compact and robust Wifi 2.4GHz antenna for installation on flat surfaces like a machine wall or roof of a kiosk terminal or the sheet metal of a vehicle. Due to the use of Nylon this antenna is resilient against adverse environments, making it suitable for use in the chemical or mining industry. The industrial application of the HCT-2400 is also supported by the wide temperature range of -40 to +85°C.

The case is protected class IP67 when mouted, a rubber gasket on the lower side is used for additional proetction. The antenna is mounted by a single hole mount. A central stub (17 mm Ø × 23mm) is used to install the antenna with a screw from the inside. The cable (300cm RG-174, SMA connector) is also fed through this central stub. This makes installation of the antenna very simple and easy. The diameter of the HCT-2400 is 50mm, height 47mm, weight 80g.

The gain of the HCT-2400 antenna is 2 dBi, the radiation characteristic is omni-directional. This makes this antenna suitable for machine-to-machine communication in production environments or for unbtrusive outdoor access points or client terminals. Another range of application is the installation on vehicles (forklifts) or on systems used in public events.

Also available as 5GHz (5100 – 5800 MHz) version with 3 dBi gain, cable 3m RG-316.

Order No.
18608 HCT-2400 2.4GHz 2 dBi, Nylon M2M Antenna 33.40 € Buy now
18608.5 HCT-5000 5GHz 3 dBi, Nylon M2M Antenna 40.30 € Buy now New
Info freight charges
Datasheet HCT-2400 Antenna (PDF, EN, 1335KB)
Datasheet HCT-5000 Antenna (PDF, EN, 27KB)